40 ton

H-Type Workshop Press

Our H-type double-column workshop press is a reliable and professional hydraulic press with a strong and steady frame and flexible work height. All STENHOJ H-type workshop presses are designed with generous workspace and a 400mm stroke double-acting cylinder. See the technical details or customise a STENHOJ press to your specifications in our configurator. Dispatch within 24 hours.

Choose from

Starts from

7,020 excl. vat

Unique Features

  • Made in Denmark with high quality European components
  • Stable fully welded frame designed for extra high rigidity
  • 400 mm piston stroke & stop in all positions
  • Double-acting and laterally moveable cylinder (left-right)
  • Strongly built and easy adjustable press bed
  • Flexible and easily adjustable daylight (300-900 mm)
  • Replaceable nose cap
  • Hard-chromed piston rod supported by long stable guiding
  • single-hand operation with variable pressing speed 0-100%
  • Manometer display
  • Energy-efficient IE3 motors

Areas of Application

  • Hot Pressing
  • Deep Drawing
  • Stamping
  • Bending
  • Assembly
  • Embossing
  • Grinding
  • Forging
  • Forming
  • Compressing
  • Punching
  • Metal Forming
  • Mounting
  • Blanking
  • Straightening
  • Molding
  • Cold Pressing

Specifications

Specifications & Dimensions
Manual Operation
Cylinder
Replaceable Nose Cap
Press Flange
Bed Plate Kit

Optional Extras

PLC Operation


Siemens ktp700 7" touch panel control with piston return and timer stop function, adjustable position, pressure control and stoke counter. Ideal for mounting and assembly work in smaller productions.

PLC Operation

Two-Hand Operation

Simultaneous operation used to safeguard the hands of the operator. The press will not start until both hands are confirmed to be in a safe position.

Two-Hand Operation

Electric Foot Operation

Safety foot operation with 3 positions and 2m hand cable. Stepless pressing speed 0-100%

Electric Foot Operation

Shielding

Transparent 4mm polycarbonate panels and teflon-coated low-friction rails for increased safety under pressing.

 

Shielding

Bed Plate Kit

Solid bed plate made from S355 quality steel with high stress resistance. The bed plate is easy adjustable with pins and has machined surfaces for precision work and T-tracks for optimal tool fitting. Includes lifting unit for easy adjustment of daylight.

Bed Plate Kit

Press Flange

Flanged piston rod end used for larger press surfaces or for mounting tools.

Press Flange

V-blocks

Solid S355 quality steel v-blocks with machined surfaces for great parallelism and fall protection. The straightening blocks have a V-shaped back for pressing round items.

V-blocks

Auto Sequence with Sliding Doors

Auto Sequence with Sliding Doors

Auto Sequence with Light Guard

Automatic sequence execution, allowing simultaneous item preparation and sequence execution. Includes fixed side and back shielding and sliding 4 mm transparent polycarbonate front drawers  with a safety switch.

Supplied with a key switch for the choice of manual and automatic sequence execution.

Auto Sequence with Light Guard

800 mm Stroke

800 mm Stroke

We recommend these tools

Press Pin Set

Press Pin Set

€460

The set consists of 8 different sizes of pressing pins, diameter 12-14-16-18-20-22-25-30 mm. Used for pressing bearings and bushings on and off. Includes an adapter for mounting the pins to the cylinder head and a bracket holder to hang the pins on the press frame side. 

For workshop press 25t, 40t, 60t, 100t

Tool plate

Tool plate

€135

Press plate for pin press support with teardrop-shaped hole. Used in combination with arbor set.

Primarily used for pressing out bearings.

 

Press Brake Tool

Press Brake Tool

€3720

Maximum tool width: 835 mm. The lower of the tool has 4 pcs. 85 deg. dies, 16, 22, 35 and 50 mm. Can be used for sheet thicknesses from 0,5 to 6 mm. Maximum press force: 45 ton.

 

Broaching Fixture

Broaching Fixture

€870

For easy handling of broach when making keyways on pulleys, clutches and other items.

Used for workshop press 25t, 40t, 60t, 100t.

Tube bending tools

Tube bending tools

€910

Bending tool used for pipe/tube bending with 6 different sizes of matrixes: 3/8" 1/2" 3/4" 1" 11/4" 11/2". Includes 2 support blocks.

Hydraulic Oil - 20L

Hydraulic Oil - 20L

€90

STENHOJ high quality hydraulic oil. 25-100t WP -> 1 can. 200 Ton presses -> 4 cans.

Order STENHOJ hydraulic oil together with your standard workshop press and receive one-year extended warranty (3 years) *

 

* wear and tear parts excluded

 

Get in Touch

Csilla Baksay Rasmussen

Product Sales Manager

  1. +45 2912 0150
  2. cbr@stenhyd.com
    • Da
    • En
    • De