Hydraulic Presses l Production | C-Type

Pressing Speeds

Control System

The user friendly control system is built to meet the latest European security regulations.
In accordance with the safety regulations, the hydraulic system has duplicated valves and is monitored by a safety PLC.
The various press functions of the press are set directly on the control cabinet and shown on the operator panel.

Operator Panel 1, 2 or 3 axes or more
Based on a Siemens PLC and a 7-, 9- or 12-inch Siemens Touch Panel.
The control consists of a freely programmable interface with up to 54 program lines to build a press program.
The user can use the program lines to control the axes of the press and 8 I/O's, dependent or independent of each other in a desired sequence.

The following features can be selected in each program line directly on the Operator Panel.

Signal exchange between individual axes and I/O
Position control, Speed control and Pressure setting.
Progressive or Degressive Pressure or Speed Regulation within a given press process.
Dwell time in bottom ram position (timer function)
Decompression time at ram return start (timer function)
Stroke & working hour counter
Memory for 1 up to 200 programs.
Error message from the PLC

Operation modes, on lockable electric selector switch

Inching (tool setting)
Two-hand operation
Single & double break light guards
Foot operation (optional)
Automatic operation

Light Guard
Using a light guard during insertion work allows safe operation without having to activate the normal operating push buttons. This works in a single or double break operation
Additional protection function against unauthorised access.
This function are limited by table size and Stroke length.

Integration Options
Possibility of signal exchange with external equipment, such as feeder, robot or transfer system.

Hydraulic Power Pack

The hydraulic power pack is located at the rear top of the press and is easily accessible and service friendly.

All our pump systems are designed to fit each press size to achieve low energy consumption and avoid excessive heat in the hydraulic system.

Our power packs are equipped with a hydraulic pump for each cylinder axis. This ensures that the Main axis, Die cushion and Ejector can work independently at the same time.
To reduce unnecessary heat and energy consumption we operate with axial pumps which match the flow to the desired speed and are designed to avoid overload of the motor and clutch system by reducing the flow automatically when the press force increases and approaches max power.

The pumps are submerged directly into the oil tank, which provides low noise.

The valve system on the hydraulic tank is made up of compact block units protected against overload, placed on the hydraulic tank and designed as a hydraulic safety system in compliance with European safety requirements.
Electric motors are minimum IE3 premium efficiency rated.

Cylinders

Bed/table and Ram/slide

Production Presses

Features

Flemming Thyssen

Thomas Thrane

Examples of C-Frame Production Presses

Technical Details

Let's get in touch

Flemming Thyssen

Thomas Thrane

Let's get in touch