Our H-Type double-column workshop press is a reliable and professional hydraulic press with a strong and steady frame and flexible work hight. All STENHOJ models are designed with generous workspace and a 400mm stroke double-acting cylinder. Customise your STENHOJ press to your specifications in our configurator below. Dispatch within 24 hours.
|MODEL||WP-H 25||WP-H 40||WP-H 60||WP-H 100||WP-H 200|
|Pressing force, max.||[kN]||250||400||600||1000||2000|
|Table width between verticals||C||[mm]||740||850||1010||1080||1150|
|Max floor space||F||[mm]||670||650||760||800||1040|
|Bed height, max.||H||[mm]||1010||1045||1145||1245||1245|
|Press bed adjustment||I||[mm]||4x150||4x150||4x150||4x150||4x150|
|Motor pump unit|
|Return load, max.||[kN]||30||30||30||30||200|
|Motor power 3x400V, 50Hz||[kW]||4||4||4||4||5.5|
|Oil reserve capacity||[L]||25||25||25||25||80|
Siemens ktp700 key/touch panel operation with piston return and timer stop function , ideal for mounting, fitting and assembly work.
Simultaneous operation used to safeguard the hands of the operator. The press will not start until both hands are confirmed to be in a safe position.
Stepless pressing speed 0-100%
Transparent 4mm polycarbonate panels and teflon-coated low-friction rails for increased safety under pressing
Solid press bed made from S355 quality steel with high stress resistance, The press bed is easy adjustable with pins and has machined surfaces for precision work and T-tracks for optimal tool fitting. Includes lifting unit for easy adjustment of daylight.
Flanged piston rod end used for larger press surfaces or for mounting tools.
Solid S355 quality steel, machined surfaces for great parallelism and fall protection, V-shaped back for pressing round items.
For workshop press 25t, 40t, 60t, 100t
The set consists of 8 different sizes of pressing pins, diameter 12-14-16-18-20-22-25-30 mm. Used for pressing bearings and bushings on and off. Includes an adapter for mounting the pins to the cylinder head and a bracket holder to hang the pins on the press frame side.
For Workshop Press 25t. 40t, 60t, 100t.
Press plate for pin press support with kidney-shaped hole. Mostly used for pressing out bearings.
Suitable for H-Frame presses from 40-200t.
Maximum tool width: 835 mm. The lower of the tool has 4 pcs. 85 deg. dies, 16, 22, 35 og 50 mm. Can be used for sheet thicknesses from 0,5 til 6 mm. Maximum press force: 45 ton.
For easy handling of broach when making keyways on pulleys, clutches and other items.
Bending tool used for pipe/tube bending with 6 different sizes of matrixes: 3/8" 1/2" 3/4" 1" 11/4" 11/2". Includes 2 support blocks.
STENHOJ high quality hydraulic oil. 25-100t WP -> 1 can. 200 Ton presses -> 4 cans.
Order STENHOJ hydraulic oil together with your standard workshop press and receive one-year extended warranty (3 years) *
* wear and tear parts excluded